Automatic sprinkler systems remain the most popular and effective fire protection technology globally. According to data from the British Automatic Fire Sprinkler Association (BAFSA), sprinklers reduce property damage by around 90% and injury rates by at least 80% when compared to unprotected properties. Beyond fire damage and injury prevention, what considerations should you make when choosing between systems?
Water usage is one of the largest deciding factors. However, in certain facilities, such as data centres, switchrooms and process environments, the amount of water discharged and, crucially, where it ends up, are equally important.
Water mist and traditional sprinklers both provide effective fire suppression, but in terms of operation, volume and discharge are key differences. If you are a facilities manager wondering what system is right for your needs, this is the blog for you.
How Does a Traditional Fire Sprinkler System Work?
Conventional sprinkler heads are activated by heat. Typically, a glass bulb or a fusible link breaks when the temperature reaches 57–68°C. Only the heads near the fire will activate, which, in theory, will contain the fire and any water damage to a specific area.
Traditional sprinklers discharge 30–60 litres of water per minute to control a fire in its early stages. Once activated, the system will continue to discharge until either it’s switched off, typically by the fire brigade once the fire is extinguished, or until the water source runs out.
Design and installation of traditional wet and dry systems in the UK is governed by BS EN 12845. For industrial or commercial facilities, warehouses, manufacturing plants and logistics centres, a traditional, automatic sprinkler system is cost-effective, compliant and an effective means of fire suppression.
The trade-off for the system’s cost and practicality is water usage. Because a sprinkler head continues to discharge until it is isolated and switched off, the water it sprays can be much greater than the fire it suppresses. Essentially, this level of discharge in an environment with sensitive equipment, whether electronic or process-critical, can mean you trade fire damage for water damage.
The Downside of Traditional Fire Sprinkler Systems: What Does Excessive Discharge Mean?
From a facilities management perspective, a sprinkler activation is never a contained event. Water reaches far beyond the fire, working its way through the floor, into cable containment, cabinetry and equipment not even touched by the fire.
For production sites and facilities with sensitive IT infrastructure, excessive discharge from traditional sprinkler systems results in long cleanup downtime and the destruction of expensive equipment.
This is the operational problem high-pressure water mist is designed to mitigate.
How Do Water Mist Systems Work?
High-pressure water mist systems operating up to 120 bar atomise water into ultra-fine droplets. At below 1,000 macrons, water from a mist system is around one-fifth the size of a water droplet from a traditional sprinkler head.
At this size, water puts out fire differently. Droplets rapidly convert to steam upon contact with the fire, absorbing thermal energy and displacing oxygen at the seat of the fire. Because suppression is achieved with a fraction of the water volume, water damage is lessened.
For water mist sprinkler systems, installation and design are covered by BS EN 14972. These systems are suited to data halls, generator rooms, switchboards and machinery spaces, any areas where minimising water damage, as well as fire damage, is a priority. Water mist systems are not suited for open spaces or exposed outdoor areas, since airflow will disperse the water mist before it can suppress the fire.
Is Water Mist Fire Suppression Right For You?
Choosing the right system comes down to four main factors: cost, the nature of the fire risk, how much water damage a facility can withstand, and existing infrastructure.
For general industrial and warehouse facilities, traditional systems are often the most cost-effective route to compliance. For any areas housing high-value or process-critical equipment, water mist or gaseous suppression systems, including inert gas systems such as IG 55 or IG 541, or suitable clean agent alternatives where compliant and available.
Despite a higher upfront cost, water mist systems are more cost-effective in the event of a fire, as they provide more effective protection for expensive equipment and reduce a business’s operational downtime.
However, given the range of variables, system selection is best confirmed through a site survey. Book yours here.
